top of page

How to Choose a Shrink Bundler: A Buyer's Checklist

9 hours ago
4 min read

A shrink bundler will run on your line for years, so the right choice pays off long after startup. This checklist walks through the decision in the same order our engineers use when they quote a machine: your product, your pack, your line, the supplier and the full budget.


New to shrink wrapping? Start with Shrink Wrap Machines: A Comprehensive Guide for every machine type and a glossary of terms.


What Is a Shrink Bundler?


A shrink bundler groups products into a pack, wraps them in film and sends the pack through a heated shrink tunnel so the film shrinks around it. Most bundlers leave a round opening on each end, called a bullseye. Here's how the main parts work together on a Polypack Tango:


Labeled diagram of the parts of a Polypack shrink bundler

  1. Infeed flybar conveyor: products are loaded onto the conveyor, where flybars push them toward the film section.

  2. Flybar assembly: the flybars guide the products over the deadplate and group them into bundles.

  3. Film feed: the machine pulls the right length of film from the film supply, using print registration marks for printed film.

  4. Transfer conveyor and wrap arm: the bundle moves onto the transfer conveyor while the wrap arm applies film around it.

  5. Shrink tunnel: heat and airflow shrink the film around the pack on the tunnel conveyor.

  6. Electrical enclosure: houses the controls that run every section.


Step 1: Gather Your Product Details


Every quote starts with the product. Have these ready for each item you plan to run:


  • Dimensions and weight

  • Container type: round, oval, square, tube, aerosol, carton or bag

  • How stable it is standing up. Products that tip over need a bundler that holds each one in place, such as the ILB bucket conveyor.

  • How many products you run and how often you change over

  • Product samples. Real products reveal issues that drawings miss.



Step 2: Decide What Your Finished Pack Should Look Like


  • Pack pattern: 2x3, 3x4 or another count, now and in the future

  • Open side or total closure: bullseye packs use less film; total closure packs seal on all sides for full protection

  • Support: no support, a corrugated pad or a tray

  • Film: clear film shows your product labels, while printed film turns every pack into shelf-ready branding

  • Extras: carry handles, labels or a case packer after the bundler



Step 3: Match the Bundler to Your Line


  • Output: your target packs per minute today and what you expect in three to five years

  • Hand load or automatic: a handload bundler like the Tango suits lower volumes and frequent changeovers; an automatic bundler suits steady, high-volume runs

  • Layout: floor space, ceiling height and whether product arrives straight on or from the side

  • What comes before and after: fillers, labelers, case packers and palletizers

  • Utilities: available power and compressed air

  • Environment: wet areas such as dairy plants call for a machine with the Water Guard package



Step 4: Ask Suppliers the Right Questions


The machine is only part of what you're buying. Ask every supplier:


  1. Where is the machine built, and where is the support team?

  2. Can we watch it run our products before it ships?

  3. Who installs it and trains our operators and maintenance team?

  4. Where are spare parts stocked, and how fast do they ship?

  5. How does the machine handle new pack sizes later?


“Since that first machine, we have purchased a total of 12 machines from Polypack and we have one on every production line.” Fred Kessie, General Manager, Plaid Enterprises

Step 5: Budget for the Whole System


Compare quotes on the full cost of ownership, not the machine price alone:


  • The bundler, shrink tunnel and conveyors

  • Change parts for each pack size

  • Installation, startup and training

  • A starter kit of spare parts

  • Shrink film, which you'll buy for the life of the machine

  • Downtime, which often costs more than any price difference between quotes


Not ready to buy? You can also rent a shrink bundler.


Step 6: Avoid These Common Mistakes


  • Buying for today only. Plan for the packs and output you'll need in a few years.

  • Ignoring unstable products. Ovals, tubes and tall bottles need positive product control.

  • Choosing on price alone. A machine that stops often costs more than one that runs.

  • Forgetting the film. Match the film to the machine and the pack before you order either.


“The Polypack team was responsive to our feedback and made key adjustments, delivering a high-quality machine at a competitive price. We are very pleased with the performance of our new Polypack machine!” Orlando Carrillo, Engineering Manager, Del Monte

Your Shrink Bundler Checklist


Bring this to every quote:


  • Product dimensions, weights and samples

  • Pack patterns, now and future

  • Open side or total closure, clear or printed film

  • Target output, now and in three to five years

  • Hand load or automatic

  • Floor plan, utilities and environment

  • Equipment before and after the bundler

  • Supplier answers on testing, training, parts and service

  • Full cost of ownership


Get Your Shrink Bundler Quote


Polypack has designed and built shrink bundlers in Pinellas Park, Florida, since 1959, with thousands of machines installed worldwide. Send us your checklist and our team will recommend the right machine for your products and line.




 
 
 

Comments


bottom of page